192.168.188.1 Login
Access 192.168.188.1 admin to WiFi repeater Login setup. http://192.168.188.1 is the official gateway to log in to the router’s settings page. With 192.168.188.1 login, you can change the router username and password and modify the other settings. To access the 192.168.188.1 login page, you need to enter 192.168.188.1 into the URL bar of the web browser and then enter the login credentials.
192.168.188.1 admin login
Check out the following steps to access the 192.168.188.1 login page:
First and foremost, power on your computer or laptop and launch any preferred web browser on your device.
Now, enter 192.168.188.1 in the URL bar of the web browser and press the enter button.
After that, enter your default username and password in the given field and tap on the login button.
Wireless extender setup
192.168.188.1 setup- steps to install and configure wifi repeater
First and foremost, unbox your WiFi range extender and connect it to the power source to turn it on.
Then, go to the wireless settings of your device and choose the WiFi extender from the list.
After that, take an ethernet cable to connect the WiFi range extender to the computer or laptop.
Now, open an updated web browser and enter 192.168.188.1 in the address bar of the web browser.
Hit the enter button and move to the login page. Enter the default username and password on the login screen and tap on the login button.
Then, the access panel will appear on your device screen. You need to go to the navigational panel and tap on the repeater option.
In the next step, a list of all available networks will display on your screen. You need to select the network you wish to extend and proceed with the next step.
If your wireless network is protected with the password, then enter the password and hit the next button.
After that, select the name and password for your wireless extender network and tap on the apply button to save the settings.
Now, your wireless extender will reboot itself to apply the changes.
A glowing LED light on the wireless router indicates that the wireless extender setup has been completed successfully.
Wireless extender login
WiFi repeater 192.168.188.1 admin wizard Login
Go through the below-mentioned steps to complete the wireless extender login process:
First and foremost, plug your router into the wall socket and turn it on.
After that, open the wireless utility on your device and choose SSID.
Then, launch an internet browser on your device and enter http://192.168.188.1 in the address bar.
Now, enter the default login credentials on the resulting page and tap on the login button if you can find the default login credentials on the backside of the router.
In the next step, select the setup wizard and tap on the Next button.
On the next screen, select the second option to set up the network manually.
Choose the wireless network you want to expand and type the password in the given field.
Change the router settings with 192.168.188.1 admin login
If you want to modify your router’s settings, then follow the below-mentioned steps:
First of all, open a web browser on your device and enter 192.168.188.1 in the URL bar to access the admin login page.
Now, enter your default username and password in the given field and tap on the login button
After that, move to the settings tab and choose the router password option.
Enter your preferred password in the given field and tpa on the apply or save button to save the changes.
Change your WiFi network name and password
You can modify the WiFi network name and password by accessing the 192.168.188.1 admin login page. Follow the below-mentioned steps to change your WiFi network name and password:
Login to your default 192.168.188.1 login page by entering the default login credentials.
Now, move to the settings tab and select the wireless settings option.
Enter your preferred WiFi network name in the SSID field and tap on the Save button.
If you want to change the WiFi password, then select the password box and enter your desired password.
Step-by-step instructions to change the local IP address
Your router has two IP addresses and if you want to alter the local IP address of your router, then follow the steps below:
First of all, open the web browser and visit the 192.168.188.1 admin login page.
Enter your default login credentials and move to the main page.
Now, you need to go to the settings tab and select the network settings option.
After that, scroll down and tap on the router settings button.
Enter your IP address and tap on the apply or save button to save changes.
How to find the IP address?
192.168.188.1 is the most common IP address, but if it is not your IP address, then you can search online with your router’s model number, or you can refer to the manual to check the IP address.
How to check the IP address on Windows?
Tap on the network icon and open the menu.
Select the “WiFi network” option. It will display a series of numbers similar to 192.168.188.1.
These numbers are the IP address of your router.
How to check the IP address on a Mac device?
Go to the Apple menu and tap on the “system preference” option.
Then, you need to select the network that you use to access the internet.
The IP address will display next to the router.
Can’t access 192.168.188.1 login-Troubleshooting
If you can’t access the 192.168.188.1 login page, then follow the below-mentioned troubleshooting tricks to fix the issue:
- Make sure that the network or ethernet cable is connected to the router and computer properly.
- Ensure that you are entering the correct IP address in the URL bar. Following are some examples of wrong IP addresses:
- www.192.168.188.1.
- 192.168.o.1.
- 192.168.188.1.com.
- Enter the IP address in the address bar, not in the search box.
- Admin is the default username and password to access the 192.168.188.1 login page. If you have changed the password, then enter your new password.
- Make sure that the proxy mode of the browser is off.
Checkout for – Setup Page